PNMA II – PROFINET Measuring Point (IP20)
Item # 114090100 – PNMA II – PROFINET measuring point (IP20)
- Monitoring of all protocols
- Supports all packet sizes with no packet loss
- All connection ports are on the front panel
- No additional effort to connect a measuring device
- Tested interaction with the PROFINET-INspektor® NT
- No free-switch port necessary
- Bi-directional data transmission up to 100 Mbps
- No network interruption when connecting diagnostic tools
For Nonreactive Access in Profinet
The PROFINET measuring point PNMA II provides nonreactive access for telegram recording in the PROFINET and other Ethernet-based networks (e.g. Industrial Ethernet) during running production.
-
- Monitoring of all protocols and support all packet sizes
- If connecting a PROFINET-INspektor® NT via a PNMA II, only two additional patch cables are needed (no crossover cable required)
- In case of a power supply failure the PROFINET communication via the PNMA II remains intact
- Power supply of additional analytic tools via the UOUT (24VDC) connector
- Analysis tools (e.g. PN-INspektor® NT or laptop) can be connected nonreactive to the two monitor jacks to monitor both communication directions simultaneously
- For evaluation of the measurement results the telegrams from both communication directions can be overlaid
- The PNMA II / PNMX does not discard error telegrams – it rather forwards them
- For evaluation of the measurement results, the telegrams from both communication directions can be overlaid
- For use in harsh environments or outside the control cabinet, the IP67-certified PNMX variant is available
